Sidebar
Table of Contents
Overrides
Speed Override
Speed Override Enable
Enables traverse and feed speed override options. When this item is disabled (no check), override controls trough either Override menu or Speed segment will have no affect on speed values.
If speed override is disabled, the speed icon is using red color.
If speed override is used, the speed icon is using orange color.
Otherwise speed icon color is normal.
Traverse
Overrides speed setting for traverse speed. Default traverse speed value is set in settings: File/Setting/Program Defaults/Traverse Speed.
Speed override controls are available also in speed panel on main window.
Current
Shows current traverse speed override value.
100% means there is no traverse speed override used.
Reset
Resets any traverse speed override.
Increase
Increases traverse speed override setting for 10%.
Decrease
Decreases traverse speed override setting for 10%.
Feed
Overrides speed setting for feed speed. Feed speed setting is set in in G-code program with F-word or in settings: File/Setting/Program Defaults/Feed Speed.
Speed override controls are available also in speed panel on main window.
Current
Shows current feed speed override value.
100% means there is no feed speed override used.
Reset
Resets any feed speed override.
Increase
Increases feed speed override setting for 10%.
Decrease
Decreases feed speed override setting for 10%.
Spindle Override
Spindle Override Enable
Enables spindle speed override options. When this item is disabled (no check), override controls trough either Override menu or speed segment will have no affect on spindle speed values.
If spindle speed override is disabled, the spindle icon is using red color.
If spindle override is used, the spindle icon is using orange color.
Otherwise spindle icon color is normal.
Spindle
Overrides speed setting for Spindle speed. Spindle speed setting is set in in g-code program with S-word or in settings: File/Setting/Program Defaults/Spindle Speed. Speed override controls are available also in Speed panel of main window.
Current
Shows current spindle override value.
100% means there is no spindle override used.
Reset
Resets any spindle override.
Increase
Increases spindle override setting for 10%.
Decrease
Decreases spindle override setting for 10%.